If you have Sony Bluetooth headphones, you are in for a lot of entertainment as these headphones can be connected to any Bluetooth-enabled device. You can pair the headphones to devices such as Sony Android TV, your computer, or phones. Before connecting the Bluetooth headphones, you must pair them with your device. For pairing, you must keep the following things into consideration.
When you buy a new headphone or you reset it, it will switch to pairing mode as soon as you turn it on. To pair it with your device, follow the steps given below:
You have to make sure that pairing is done in five minutes as the pairing mode of Sony headphones does not last more than five minutes. If the mode has ended, you will have to restart the whole process. This is the basic process but some things might differ when you are connecting your Bluetooth headphones to different devices.
You can connect your Sony Bluetooth headphones to Android smartphones and tablets. For doing this, follow the instructions given below:
To connect your Sony Bluetooth Headphones to an Apple phone, turn on the phone and unlock it. Go to the Bluetooth setting and turn on Bluetooth.
First of all, you have to make sure that your MAC has the compatible OS for connection. If your computer has macOS High Sierra 10.13 or higher, you can connect to the headphones. In some computers, the built-in Bluetooth adapter has to be powered on. Refer to the instruction manual that comes with the computer to see how this is done. After that, turn on the speaker on your computer.
If the audio quality is not good enough, check for the A2DP function on your computer. This function is in control of the music connections to your MAC. Enable it from the settings.
Make sure that the Bluetooth adapter is turned on, if required and then follow the instructions below for Sony Bluetooth headphones pairing.
Check for the Bluetooth adapter. If it needs to be turned on, turn it on before following the steps given below.
Just like MAC, the in-build Bluetooth adapter might need to be turned on from the computer. For, Sony Bluetooth headphones pairing, refer to the instructions guide of the computer for this. After that, turn on the headset as mentioned at the start of the article.
When you turn on your Sony headphones, they will automatically try to connect to the device that they were last connected to. So, you do not have to connect them to your computer or phone every single time. However, if you want to connect the headphones to a new device and you are not able to do that, this could be because the headphones are trying to secure a connection to the previously connected device. In this case, terminate the connection from the previous device and then try connecting again.
The procedures given above for connecting are exemplary. Some computers come with special guidelines present in the instructions manual. Refer to them if you are unable to connect to Bluetooth using standard methods mentioned above.
Most of the time, when you are working in an office or a small workspace,…
Just like all other components of your computer, the graphics card is also an integral…
You will often hear the sad news from a family member or a friend about…
In 2014, about 22 million smartphones in the US alone stand to become useless after…
The iPhones such as iPhone 13, iPhone 13 Pro, and iPhone 12 have shown that…
Are you not able to change the access point names and found that the APN…